2022-03-14
A Novel Dual Material Bionic Flexible Logo Antenna with EBG Structure
By
Progress In Electromagnetics Research M, Vol. 109, 13-23, 2022
Abstract
Based on the principle of bionics, this paper combines the design of flexible bionic antenna with Chinese culture, and proposes a dual-material bionic antenna with Electromagnetic Band Gap(EBG) structure. The antenna uses a polyimide flexible substrate. Radiation patch of this antenna is shaped like a ``pear flower'', and the ``CHINA'' shaped slot is etched on the ground to form a Logo mark. In order to reduce the impact of antenna radiation on human body, the introduction of an EBG structure made of Polydimethylsiloxane (PDMS) material makes the front-to-back ratio of the antenna radiation significantly increased. The antenna was bent in different ways and was placed on human body model for simulation and testing. The results showed that the antenna achieved an impedance bandwidth of 18.8% (2.22-2.46 GHz), the peak gain was 4.02 dBi, and the antenna was low sensitive to deformation, which makes it suitable for modern flexible electronic equipment.
Citation
Daming Lin, Enchen Wang, Jie Wang, Wen Zhang, and Hao Zhang, "A Novel Dual Material Bionic Flexible Logo Antenna with EBG Structure," Progress In Electromagnetics Research M, Vol. 109, 13-23, 2022.
doi:10.2528/PIERM21111501
References

1. Jiang, W., Y. Liu, S. Gong, and T. Hong, "Application of bionics in antenna radar cross section reduction," IEEE Antennas and Wireless Propagation Letters, Vol. 8, 1275-1278, 2009.
doi:10.1109/LAWP.2009.2037168        Google Scholar

2. Xue, J., Y. Liu, W. Wang, and H. Liu, "A novel broadband bionic Yagi-Uda antenna with low radar cross section," International Radar Conference, IET, 2013.        Google Scholar

3. Kim, S., Y. J. Ren, H. Lee, A. Rida, S. Nikolaou, and M. M. Tentzeris, "Monopole antenna with inkjet-printed EBG array on paper substrate for wearable applications," IEEE Antennas and Wireless Propagation Letters, Vol. 11, 663-666, 2012.
doi:10.1109/LAWP.2012.2203291        Google Scholar

4. Khaleel, H. R., H. M. Al-Rizzo, D. G. Rucker, and S. Mohan, "A compact polyimide-based UWB antenna for flexible electronics," IEEE Antennas and Wireless Propagation Letters, Vol. 11, 564-567, 2012.
doi:10.1109/LAWP.2012.2199956        Google Scholar

5. Abbasi, Q. H., M. U. Rehman, X. D. Yang, A. Alomainy, K. Qaraqe, and E. Serpedin, "Ultrawideband band-notched flexible antenna for wearable applications," IEEE Antennas and Wireless Propagation Letters, Vol. 12, 1606-1609, 2014.
doi:10.1109/LAWP.2013.2294214        Google Scholar

6. Sundarsingh, E. F., S. Velan, M. Kanagasabai, A. K. Sarma, C. Raviteja, and M. G. N. Alsath, "Polygon-shaped slotted dual-band antenna for wearable applications," IEEE Antennas and Wireless Propagation Letters, Vol. 13, 611-614, 2014.
doi:10.1109/LAWP.2014.2313133        Google Scholar

7. Upadhyaya, T., A. Desai, R. Patel, U. Patel, and K. Pandya, "Compact transparent conductive oxide based dual band antenna for wireless applications," 2017 Progress In Electromagnetics Research Symposium - Fall (PIERS - FALL), 41-45, Singapore, Nov. 19-22, 2017.        Google Scholar

8. Desai, A., C. D. Bui, J. Patel, T. Upadhyaya, G. Byun, and T. K. Nguyen, "Compact wideband four element optically transparent MIMO antenna for mm-Wave 5G applications," IEEE Access, Vol. 8, 194206-194217, 2020.
doi:10.1109/ACCESS.2020.3033314        Google Scholar

9. Tak, J. and J. Choi, "An all-textile Louis Vuitton logo antenna," IEEE Antennas and Wireless Propagation Letters, Vol. 14, 1211-1214, 2015.
doi:10.1109/LAWP.2015.2398854        Google Scholar

10. Monti, G., L. Corchia, and L. Tarricone, "Logo antenna on textile materials," 44th European Microwave Conference (EuMC), IEEE, 2014.        Google Scholar

11. Rafiee, M. and M. R. Kamarudin, "UTM-logo wideband printed monopole antenna surrounded with circular ring patch," Progress In Electromagnetics Research C, Vol. 15, 157-164, 2010.
doi:10.2528/PIERC10070709        Google Scholar

12. Velan, S., E. F. Sundarsingh, M. Kanagasabai, A. K. Sarma, C. Raviteja, R. Sivasamy, and J. K. Pakkathillam, "Dual-band EBG integrated monopole antenna deploying fractal geometry for wearable applications," IEEE Antennas and Wireless Propagation Letters, Vol. 14, No. 1, 249-252, 2015.
doi:10.1109/LAWP.2014.2360710        Google Scholar

13. Liu, X. Y., Y. H. Di, H. Liu, Z. T. Wu, and M. M. Tentzeris, "A planar windmill-like broadband antenna equipped with artificial magnetic conductor for off-body communications," IEEE Antennas and Wireless Propagation Letters, Vol. 15, 64-67, 2015.        Google Scholar

14. Abbasi, M., S. S. Nikolaou, M. A. Antoniades, M. Nikolic, and P. Vryonides, "Compact EBG-backed planar monopole for BAN wearable applications," IEEE Transactions on Antennas and Propagation, Vol. 65, No. 2, 453-463, 2017.
doi:10.1109/TAP.2016.2635588        Google Scholar

15. Hu, B., G. Gao, L. He, X. D. Cong, and J. N. Zhao, "Bending and on-arm effects on a wearable antenna for 2.45 GHz body area network," IEEE Antennas and Wireless Propagation Letters, Vol. 15, 378-381, 2016.
doi:10.1109/LAWP.2015.2446512        Google Scholar