2021-12-14
Design and Optimization of a TEM Cell Structure Suitable for Wider Bandwidth
By
Progress In Electromagnetics Research M, Vol. 106, 93-104, 2021
Abstract
Transverse electromagnetic (TEM) cell is usually used to evaluate the electromagnetic immunity and electromagnetic radiation disturbance of the equipment under test (EUT) and integrated circuit (IC). Affected by the structure of the TEM cell, high-order modes and reflection will be generated in the high frequency range, which will limit the higher frequency applications of the TEM cell. In this paper, the TEM cell specified in IEC61967-2 standard is improved by adopting several methods, including segmented impedance matching, slitting outer conductor, slotting inner conductor, adding absorbing materials and adding an external shielding box. The results show that the improved TEM cell voltage standing wave ratio (VSWR) is less than 1.2 in 0-3.4 GHz, less than 1.3 in 0-3.75 GHz, and less than 1.5 in 0-4.06 GHz; at the same time, the S-parameter characteristics are better.
Citation
Ting Zhou, Xinwei Peng, Shoukun Huang, Jicong Zhao, and Haiyan Sun, "Design and Optimization of a TEM Cell Structure Suitable for Wider Bandwidth," Progress In Electromagnetics Research M, Vol. 106, 93-104, 2021.
doi:10.2528/PIERM21081501
References

1. Song, C. J., X. Y. Feng, and F. Dai, "TEM cell frequency expansion method based on waveguide slot antenna,", Vol. 44, No. 302(04), 136-142.
doi:10.1109/TEMC.2008.919028        Google Scholar

2. International Electrotechnical Commission "IEC61967-2 Integrated circuits-Measurement of electromagnetic emissions, 150 kHz to 1 GHz - Part 2: Measurement of radiated emissions, TEM-cell and wideband TEM-cell method,", Geneva, Switzerland, 2005.        Google Scholar

3. Deng, S., D. Pommerenke, T. Hubing, et al. "An experimental investigation of higher order mode suppression in TEM cells," IEEE Transactions on Electromagnetic Compatibility, Vol. 50, No. 2, 416-419, 2008.        Google Scholar

4. Koohestani, M., M. Ramdani, and R. Perdriau, "Impact of mode propagation on radiated immunity characterization in commonly used TEM cells," 2019 12th International Workshop on the Electromagnetic Compatibility of Integrated Circuits (EMC Compo), 6-8, 2019.        Google Scholar

5. Luo, W., Y. L. Guan, and J. Li, "Three new strip-line TEM cells in EMC test," 2016 IEEE International Conference on Electronic Information and Communication Technology (ICEICT), 497-500, 2016.
doi:10.1109/TEMC.1978.303664        Google Scholar

6. Arezoomand, M., M. K. Meybodi, and N. Noori, "Design of a TEM cell using both multi-step and piecewise linear tapering," 2016 8th International Symposium on Telecommunications (IST), 2016.
doi:10.1109/TEMC.2008.921010        Google Scholar

7. Crawford, M. L., J. L. Workman, and C. J. Thomas, "Expanding the bandwidth of TEM cells for EMC measurements," IEEE Transactions on Electromagnetic Compatibility, Vol. 20, No. 3, 368-375, 2007.
doi:10.1109/TMTT.1976.1128915        Google Scholar

8. Walter, A. J. and C. Leat, "Control of the TE111 resonance in an asymmetric TEM cell," IEEE Transactions on Electromagnetic Compatibility, Vol. 50, No. 2, 431-434, 2008.        Google Scholar

9. Tippet, J. C. and D. C. Chang, "A new approximation for the capacitance of a rectangular-coaxial-strip transmission line," IEEE Transactions on Microwave Theory & Techniques, Vol. 14, No. 9, 602-604, 1976.        Google Scholar

10. Chen, J., F. Y. Wan, and P. Fan, "Design of novel broadband TEM cell," Journal of Hefei University of Technology (Natural Science), Vol. 39, No. 7, 938-942, 2016.        Google Scholar

11. Su, D. L., A. X. Chen, S. G. Xie, et al. Electromagnetic Field and Electromagnetic Wave, 349-356, Higher Education Press, 2008.

12. Quan, S. H., The Basis of Microwave Technology, 155-157, Higher Education Press, 2011.