2017-04-18
Electromagnetic Shielding Characterization of Conductive Knitted Fabrics
By
Progress In Electromagnetics Research M, Vol. 56, 33-41, 2017
Abstract
This paper examines the electromagnetic shielding characteristics of milano, cardigan and lacoste with respect to weft and rib type composite knitted fabrics. All of these fabrics, made of hybrid yarns containing 50µm diameter metal fibres such as copper, silver and stainless steel, were produced for electromagnetic shielding purposes. The shielding e effectiveness (SE) of the fabrics was measured by reading S parameters from the signal when the sample was placed in the path of signal at the frequency range 1.7 to 2.6 GHz inside the WR430 waveguide system. After which S parameters was converted to SE values. The variation in electromagnetic shielding eff effectiveness (EMSE) with the factors, such as radiant frequency, metal type, course density and geometry, were discussed. Experimental results show that all factors, especially the geometry of the fabric, have signifi cant effect on SE. The best EMSE values were obtained by milano type knitted fabrics which was above 20dB. It was found that milano, cardigan and lacoste composite fabrics, uncommon in EMSE experiments found in literature, give better shielding performances than rib and weft composite fabrics, under the same conditions.
Citation
A. Oguz KIZILCAY, Ediz Delihasanlar, Fidan Gamze Kizilcay Abdulla, and Ahmet Hayrettin Yuzer, "Electromagnetic Shielding Characterization of Conductive Knitted Fabrics," Progress In Electromagnetics Research M, Vol. 56, 33-41, 2017.
doi:10.2528/PIERM17011305
References

1. Ozdemir, H., S. S. Ugurlu, and A. Ozkurt, "The electromagnetic shielding of textured steel yarn based woven fabrics used for clothing," Journal of Industrial Textiles, Vol. 45, No. 3, 416-436, 2015.
doi:10.1177/1528083715569369        Google Scholar

2. Safarova, V. and J. Militky, "Development of a hybrid electromagnetic shielding fabric," 18th International Conference on Composite Materials, 21-26, 2011.        Google Scholar

3. Ogrutan, P. L.., L. E. Aciu, and C. Stanca, "Attenuation characteristics of electromagnetic shielding materials," Journal of Environmental Research and Protection, Vol. 11, No. 1, 66-75, 2014.        Google Scholar

4. Lu, K., F. Fu, H. Sun, et al. "Study on electromagnetic shielding properties of conductive sheets," International Conference on Biobase Material Science and Engineering Study, 127-131, 2012.        Google Scholar

5. Perumalraj, R. and B. S. Dasaradan, "Electromagnetic shielding effectiveness of doubled copper-cotton yarn woven materials," Fibres and Textiles in Eastern Europe, Vol. 18, No. 3, 74-80, 2010.        Google Scholar

6. Chung, D. D. L., "Materials for electromagnetic interference shielding," Journal of Materials Engineering and Performance, Vol. 9, No. 3, 350-354, 2000.
doi:10.1361/105994900770346042        Google Scholar

7. Soyaslan, D., S. Comlekci, and O. Goktepe, "Determination of electromagnetic shielding performance of plain knitting and 1 × 1 rib structures with coaxial test fixture relating to ASTM D4935," The Journal of the Textile Institute, Vol. 101, No. 10, 890-897, 2010.
doi:10.1080/00405000902945360        Google Scholar

8. Das, A., J. Krishnasamy, R. Alagirusamy, and A. Basu, "Electromagnetic interference shielding effectiveness of SS/PET hybrid yarn incorporated woven fabrics," Fibers and Polymers, Vol. 15, No. 1, 169-174, 2014.
doi:10.1007/s12221-014-0169-0        Google Scholar

9. Cheng, L., T. Zhang, M. Guo, et al. "Electromagnetic shielding effectiveness and mathematical model of stainless steel composite fabric," The Journal of the Textile Institute, 577-586, 2014.        Google Scholar

10. Oxley, C. H., J. Wiliams, R. Hopper, et al. "Measurement of the reflection and transmission properties of conducting fabrics at milli-metric wave frequencies," IET Science, Measurement and Technology, Vol. 1, No. 3, 166-169, 2007.
doi:10.1049/iet-smt:20060053        Google Scholar

11. Ozen, M. S., E. Sancak, and M. Akalin, "The effect of needle-punched nonwoven fabric thickness on electromagnetic shielding effectiveness," Textile Research Journal, Vol. 85, No. 8, 804-815, 2015.
doi:10.1177/0040517514555794        Google Scholar

12. Perumalraj, R. and B. S. Dasaradan, "Electromagnetic shielding effectiveness of copper core yarn knitted fabrics," Indian Journal of Fibre and Textile Research, Vol. 34, No. 2, 149-154, 2009.        Google Scholar

13. Cai, J., Z. Xuan, and H. Liu, "The testing and equivalent calculation of electromagnetic shielding effectiveness of metal fiber blended fabrics," 2nd International Conference on Measurement, Information and Control, Vol. 2, 1464-1467, 2013.        Google Scholar

14. Erdumlu, N. and C. Saricam, "Electromagnetic shielding effectiveness of woven fabrics containing cotton/metal-wrapped hybrid yarns," Journal of Industrial Textiles, Vol. 46, No. 4, 1084-1103, 2016.
doi:10.1177/1528083715613628        Google Scholar

15. Das, A., V. K. Kothari, A. Kothari, et al. "Effect of various parameters on electromagnetic shielding effectiveness of textile fabrics," Indian Journal of Fibre and Textile Research, Vol. 34, 144-148, 2009.        Google Scholar

16. Ceken, F., G. Pamuk, O. Kayacan, et al. "Electromagnetic shielding properties of plain knitted fabrics containing conductive yarns," Journal of Engineered Fibers and Fabrics, Vol. 7, No. 4, 81-87, 2012.        Google Scholar

17. Ortlek, H. G., O. G. Saracoglu, O. Saritas, et al. "Electromagnetic shielding characteristics of woven fabrics made of hybrid yarns containing metal wire," Fibers and Polymers, Vol. 13, No. 1, 63-67, 2012.
doi:10.1007/s12221-012-0063-6        Google Scholar

18. Wang, X. and Z. Liu, "Influence of fabric density on shielding effectiveness of electromagnetic shielding fabric," Przeglad Elektrotechnczny, Vol. 11a, 236-238, 2012.        Google Scholar

19. Kumar, R., A. Kumar, and D. Kumar, "RFI/EMI/microwave shielding behaviour of metallized fabric - A theoretical approach," Electromagnetic Interference and Compatibility, 447-450, 1997.
doi:10.1109/ICEMIC.1997.669847        Google Scholar

20. Clayton, R. P., Introduction to Electromagnetic Compatibility, 2nd Ed., John Wiley and Sons Inc., 2006.

21. Drinovsky, J. and Z. Kejik, "Electromagnetic shielding efficiency measurement of composite materials," Measurement Science Review, Vol. 9, No. 4, 109-112, 2009.
doi:10.2478/v10048-009-0020-8        Google Scholar

22. Mathew, K. T., U. G. Kalappura, and R. Augustine, "Polyaniline based materials for efficient EMI shielding," International Union of Radio Science, 2008.        Google Scholar