2026-11-12
Investigation of the Conversion Principle and Electromagnetic Similarity Between Fractional-Slot Concentrated Winding PMSMs and Their Derivative Multi-Tooth Split-Pole Permanent Magnet Vernier Machines
By
Progress In Electromagnetics Research M, Vol. 141, 93-102, 2026
Abstract
Permanent magnet vernier machines (PMVMs) based on the flux-modulation principle are attracting increasing attention in low-speed direct-drive applications because of their high torque capability. This study investigates the intrinsic conversion relationship between a multi-tooth split-pole concentrated winding (MSCW) PMVM and an ordinary fractional-slot concentrated winding (FSCW) permanent magnet synchronous machine (PMSM). First, the conversion principle is established, from which the source machine concept is introduced, and potential slot/pole combinations of the original PMSM are derived analytically. Subsequently, the electromagnetic similarity between an FSCW-PMSM and the MSCW-PMVMs derived from it is examined in terms of the spatial magnetic-field distribution, winding connection, back-electromotive force (back-EMF), and cogging torque. Results show that an FSCW-PMSM and its derivative MSCW-PMVMs share identical winding connections and cogging-torque periods, which confirms that the initial design of an MSCW-PMVM can be carried out by referring to its FSCW-PMSM source machine.
Citation
Yang Zhang, Shuwei Wang, Jiming Luo, Shiyang Hu, and Duane Decker, "Investigation of the Conversion Principle and Electromagnetic Similarity Between Fractional-Slot Concentrated Winding PMSMs and Their Derivative Multi-Tooth Split-Pole Permanent Magnet Vernier Machines," Progress In Electromagnetics Research M, Vol. 141, 93-102, 2026.
DOI:10.2528/PIERM26100401
References

1. Lipo, T. A. and A. Toba, "Generic torque-maximizing design methodology of surface permanent-magnet vernier machine," IEEE Transactions on Industry Applications, Vol. 36, No. 6, 1539-1546, November 2000.
doi:10.1109/28.887204        Google Scholar

2. Li, Dawei, Ronghai Qu, and Thomas A. Lipo, "High-power-factor vernier permanent-magnet machines," IEEE Transactions on Industry Applications, Vol. 50, No. 6, 3664-3674, November 2014.
doi:10.1109/tia.2014.2315443        Google Scholar

3. Li, Jiangui, K. T. Chau, J. Z. Jiang, Chunhua Liu, and Wenlong Li, "A new efficient permanent-magnet vernier machine for wind power generation," IEEE Transactions on Magnetics, Vol. 46, No. 6, 1475-1478, June 2010.
doi:10.1109/tmag.2010.2044636        Google Scholar

4. Liu, Guohai, Junqin Yang, Wenxiang Zhao, Jinghua Ji, Qian Chen, and Wensheng Gong, "Design and analysis of a new fault-tolerant permanent-magnet vernier machine for electric vehicles," IEEE Transactions on Magnetics, Vol. 48, No. 11, 4176-4179, November 2012.
doi:10.1109/tmag.2012.2204042        Google Scholar

5. Yang, Junqin, et al., "Quantitative comparison for fractional-slot concentrated-winding configurations of permanent-magnet vernier machines," IEEE Transactions on Magnetics, Vol. 49, No. 7, 3826-3829, July 2013.
doi:10.1109/tmag.2013.2243407        Google Scholar

6. Chung, Shi-Uk, Ji-Won Kim, Byung-Chul Woo, Do-Kwan Hong, Ji-Young Lee, and Dae-Hyun Koo, "A novel design of modular three-phase permanent magnet vernier machine with consequent pole rotor," IEEE Transactions on Magnetics, Vol. 47, No. 10, 4215-4218, October 2011.
doi:10.1109/tmag.2011.2157324        Google Scholar

7. Qu, Ronghai, Dawei Li, and Jin Wang, "Relationship between magnetic gears and vernier machines," 2011 International Conference on Electrical Machines and Systems, 1-6, Beijing, China, August 2011.
doi:10.1109/icems.2011.6073448

8. Zhao, Wenxiang, Kangkang Du, and Liang Xu, "Design considerations of fault-tolerant permanent magnet vernier machine," IEEE Transactions on Industrial Electronics, Vol. 67, No. 9, 7290-7300, September 2020.
doi:10.1109/tie.2019.2942571        Google Scholar

9. Du, Kangkang, Liang Xu, Wenxiang Zhao, and Guohai Liu, "Analysis and design of a fault-tolerant permanent magnet vernier machine with improved power factor," IEEE Transactions on Industrial Electronics, Vol. 69, No. 5, 4353-4363, May 2022.
doi:10.1109/tie.2021.3080206        Google Scholar

10. Xu, Liang, Wenjie Wu, and Wenxiang Zhao, "Airgap magnetic field harmonic synergetic optimization approach for power factor improvement of PM vernier machines," IEEE Transactions on Industrial Electronics, Vol. 69, No. 12, 12281-12291, December 2022.
doi:10.1109/tie.2021.3135634        Google Scholar

11. Du, Kangkang, Zhengmeng Liu, Wanshu Yan, Liang Xu, and Guohai Liu, "Analysis of fault-tolerant permanent magnet vernier machines with improved output torque," IEEE Transactions on Energy Conversion, Vol. 40, No. 2, 1434-1444, June 2025.
doi:10.1109/tec.2024.3490667        Google Scholar

12. Fang, Li, Dawei Li, Xiang Ren, and Ronghai Qu, "A novel permanent magnet vernier machine with coding-shaped tooth," IEEE Transactions on Industrial Electronics, Vol. 69, No. 6, 6058-6068, June 2022.
doi:10.1109/tie.2021.3088331        Google Scholar

13. Xu, Liang, Wenxiang Zhao, Rende Li, and Shuangxia Niu, "Analysis of rotor losses in permanent magnet vernier machines," IEEE Transactions on Industrial Electronics, Vol. 69, No. 2, 1224-1234, February 2022.
doi:10.1109/tie.2021.3063974        Google Scholar

14. Zhao, Yu, Xiang Ren, Xinggang Fan, Dawei Li, and Ronghai Qu, "A high power factor permanent magnet vernier machine with modular stator and yokeless rotor," IEEE Transactions on Industrial Electronics, Vol. 70, No. 7, 7141-7152, July 2023.
doi:10.1109/tie.2022.3199863        Google Scholar

15. Zhang, Yuanzhi, Dawei Li, Peng Yan, Xiang Ren, Ronghai Qu, and Jimin Ma, "A high torque density claw-pole permanent-magnets vernier machine," IEEE Journal of Emerging and Selected Topics in Power Electronics, Vol. 10, No. 2, 1756-1765, April 2022.
doi:10.1109/jestpe.2021.3065997        Google Scholar

16. Jiang, Jifu, Shuangxia Niu, Zhenghao Li, Litao Dai, Wenjie Wu, and W. L. Chan, "Design of a novel dual-PM vernier machine for high-torque direct-drive application," IEEE Transactions on Transportation Electrification, Vol. 11, No. 2, 6107-6118, April 2025.
doi:10.1109/tte.2024.3498465        Google Scholar

17. Niu, Shuangxia, S. L. Ho, W. N. Fu, and L. L. Wang, "Quantitative comparison of novel vernier permanent magnet machines," IEEE Transactions on Magnetics, Vol. 46, No. 6, 2032-2035, June 2010.
doi:10.1109/tmag.2010.2042429        Google Scholar

18. Jia, Shaofeng, et al., "Hybrid excitation stator PM vernier machines with novel DC-biased sinusoidal armature current," IEEE Transactions on Industry Applications, Vol. 54, No. 2, 1339-1348, March 2018.
doi:10.1109/tia.2017.2779805        Google Scholar

19. Zhao, Fei, Thomas A. Lipo, and Byung-il Kwon, "Dual-stator interior permanent magnet vernier machine having torque density and power factor improvement," Electric Power Components and Systems, Vol. 42, No. 15, 1717-1726, October 2014.
doi:10.1080/15325008.2014.950360        Google Scholar

20. Okada, Kenji, Noboru Niguchi, and Katsuhiro Hirata, "Analysis of a vernier motor with concentrated windings," IEEE Transactions on Magnetics, Vol. 49, No. 5, 2241-2244, May 2013.
doi:10.1109/tmag.2012.2237392        Google Scholar

21. Wang, Yuxiao, Zhengmeng Liu, Hao Ke, Qian Chen, and Guohai Liu, "A universal equivalent thermal network model for PMV machine with detailed in-slot mesh," Progress In Electromagnetics Research C, Vol. 168, 190-200, 2026.
doi:10.2528/pierc26011207        Google Scholar

22. Kui, Zhangtao, Libing Jing, Zeyu Min, and Kun Yang, "Design and analysis of a novel U-PM vernier machine with HTS bulks," Progress In Electromagnetics Research C, Vol. 128, 97-111, 2023.
doi:10.2528/pierc22110709        Google Scholar

23. Zhang, Yang, Jiming Luo, Mingming Huang, Quanzhen Huang, and Duane Decker, "Design and experimental verification of variable flux permanent magnet vernier machine using time-stepping finite element method," Progress In Electromagnetics Research C, Vol. 129, 115-126, 2023.
doi:10.2528/pierc22112102        Google Scholar

24. Feng, Hui and Meimei Xu, "Analysis and evaluation of a novel linear partitioned primary permanent magnet vernier machine with asymmetric winding," Progress In Electromagnetics Research C, Vol. 171, 200-211, 2026.
doi:10.2528/pierc26042703        Google Scholar

25. Wang, Fangrong, Wen Kuang, and Chaozhi Huang, "A hybrid-magnet rotor topology for demagnetization-resistant PMaSynRMs using kriging-NSGA-III optimization," Progress In Electromagnetics Research C, Vol. 173, 41-52, 2026.
doi:10.2528/pierc26072401        Google Scholar