2011-06-02
Measurement of ZigBee Wireless Communications in Mode-Stirred and Mode-Tuned Reverberation Chamber
By
Progress In Electromagnetics Research M, Vol. 18, 171-178, 2011
Abstract
It is highly desirable to use advanced sensor networks to continuously monitor the structural health of an aircraft. It would be advantageous if the network was wireless to avoid the need for additional wire bundles and associated interconnects but the reliability of a suitable wireless channel in low loss enclosed structures needs to be understood. This paper reports on work undertaken testing the 2.4 GHz ZigBee wireless protocol in a mode stirred and mode tuned reverberation chamber. The results show that even for very low loss enclosures wireless communications is possible but only under very specific conditions. A higher loss chamber has more reliable communication channels, but even with loading there are large variations in packet error rates even between adjacent ZigBee channels.
Citation
Anthony Centeno, and Neil Alford, "Measurement of ZigBee Wireless Communications in Mode-Stirred and Mode-Tuned Reverberation Chamber," Progress In Electromagnetics Research M, Vol. 18, 171-178, 2011.
doi:10.2528/PIERM11040707
References

1. Bai, H., M. Atiquzzman, and D. Litja, "Wireless sensor network for aircraft health monitoring," Proceedings of First International Conference on Broadband Networks, 748-750, Oct. 2004.        Google Scholar

2. Yedavalli, R. K. and R. K. Belapurkav, "Application of wireless sensor networks to aircraft control and health management systems," J. Control Theory Appl., Vol. 9, No. 1, 28-33, 2011.
doi:10.1007/s11768-011-0242-9        Google Scholar

3. Harman, R., "Wireless solutions for aircraft condition based main- tenance systems," Proceedings of IEEE Aerospace Conference, 6- 2877-6-2886, 2002.        Google Scholar

4. Dawson, J. F., D. C. Hope, M. Panitz, and C. Christopoulos, "Wireless networks in vehicles," IET Seminar on Electromagnetic Propagation in Structures and Buildings, 1-6, Dec. 2008.        Google Scholar

5. Hope, D., J. Dawson, A. Marvin, M. Panitz, C. Christopoulos, and P. Sewell, "Assessing the performance of ZigBee in a reverberant environment using a mode stirred chamber," IEEE International Symposium on Electromagnetic Compatibility, Detroit, Aug. 2008.        Google Scholar

6. "ZigBee specification,", ZigBee Alliance, http://www.zigbee.org-/Specifications.aspx..        Google Scholar

7. Panitz, M., C. Christopoulos, P. Sewell, D. C. Hope, J. F. Dawson, A. C. Marvin, T. Salo, E. Fearon, K. G. Watkins, G. Deardon, and C. D. Harley, "The opportunities and challenged associated with wireless interconnects in aircraft," Proceedings I. MechE Pt. G, J. Aerospace Engineering, Vol. 224, No. 4, 459-470, 2010.
doi:10.1243/09544100JAERO566        Google Scholar

8. Panitz, M., C. Christopoulos, P. Sewell, D. C. Hope, J. F. Dawson, and A. C. Marvin, "Modelling wireless communication in highly- multipath low-loss environments," International Symposium on Electromagnetic Compatibility - EMC Europe 2008, 709-714, Hamburg, 2008.        Google Scholar

9. Ferrara, G., M. Migliaccio, and A. Sorrentino, "Characterization of GSM non-line-of-sight propagation channels generated in a reverberating chamber by using bit error rates," IEEE Transaction on Electromagnetic Compatibility, Vol. 49, No. 3, 467-473, 2007.
doi:10.1109/TEMC.2007.903040        Google Scholar

10. Arnaut, L. R. and P. D. West, "Evaluation of the NPL untuned stadium reverberation chamber using mechanical and electronic stirring techniques,", NPL Rep. CEM 11, 1998, Available online: http://publications.npl.co.uk/npl web/pdf/cem11.pdf..        Google Scholar