volume | PIER Journals

Abstract

This paper presents a substrate independent empirical formulation for the bridge inductance of inductively tuned RF MEMS shunt switches, allowing a systematic design approach to tune their isolation bands. Inductive tuning of RF MEMS switches is achieved by inserting recesses in the ground plane and meanders to the bridges, allowing the tuning of the isolation band of the switch from the X-band to the mm-wave band. The bridge inductance is first extracted from parametric EM simulations of the RF MEMS shunt switches and then fitted to the proposed formulations using empirical coefficients. The accuracy of the formulations is verified with the measurements on the switches that are fabricated using an in-house surface micromachining RF MEMS process on a 500-µm thick glass substrate. Measurement results verify that the bridge inductances can be determined by the provided empirical formulation.

1. Rebeiz, G. M., RF MEMS Theory, Design, and Technology, John Wiley & Sons, Hoboken, NJ, 2003.
doi:10.1002/0471225282

2. Brown, E. R., "RF-MEMS switches for reconfigurable integrated circuits," IEEE Trans. Microwave Theory and Tech., Vol. 46, No. 11, 1868-1880, Nov. 1998.
doi:10.1109/22.734501 Google Scholar

3. Afrang, S. and E. Abbaspour-Sani, "A low voltage MEMS structure for RF capacitive switches," Progress In Electromagnetics Research, Vol. 65, 157-167, 2007. Google Scholar

4. Muldavin, J. B. and G. M Rebeiz, "High isolation CPW MEMS shunt switches, Part I: Modeling," IEEE Trans. Microwave Theory and Tech., Vol. 48, No. 6, 1045-1052, Jun. 2000.
doi:10.1109/22.904743 Google Scholar

5. Muldavin, J. B. and G. M Rebeiz, "High isolation CPW MEMS shunt switches, Part II: Design," IEEE Trans. Microwave Theory and Tech., Vol. 48, No. 6, 1053-1056, Jun. 2000.
doi:10.1109/22.904744 Google Scholar

6. Tan, G. L. and G. M. Rebeiz, "DC-26 GHz MEMS series-shunt absorptive switches," IEEE Int. Microwave Symp. Dig., 325-328, 2001. Google Scholar

7. Malczewski, A., S. Eshelman, B. Pillans, J. Ehmke, and C. L. Goldsmith, "X-band RF MEMS phase shifters for phased array applications," IEEE Microwave Wireless Comp. Lett., Vol. 9, 517-519, Dec. 1999. Google Scholar

8. Kim, H.-T., S. Jung, K. Kang, J.-H. Park, Y.-K. Kim, and Y. Kwon, "Low-loss analog and digital micromachined impedance tuners at the Ka-band," IEEE Trans. Microwave Theory and Tech., Vol. 49, No. 12, 2394-2400, Dec. 2001.
doi:10.1109/22.971626 Google Scholar

9. Monti, G., R. De Paolis, and L. Tarricone, "Design of a 3-state reconfigurable CRLH transmission line based on MEMS switches," Progress In Electromagnetics Research, Vol. 95, 283-297, 2009.
doi:10.2528/PIER09071109 Google Scholar

10. Erdil, E., K. Topalli, M. Unlu, O. Aydin Civi, and T. Akin, "Frequency tunable microstrip patch antenna using RF MEMS technology," IEEE Trans. Antennas and Propagation, Vol. 55, 1193-1196, Apr. 2007.
doi:10.1109/TAP.2007.893426 Google Scholar

11. Wu, W., B. Z. Wang, and S. Sun, "Pattern reconfigurable microstrip patch antenna," Journal of Electromagnetic Waves and Applications, Vol. 19, No. 1, 107-113, 2005.
doi:10.1163/1569393052955125 Google Scholar

12. Li, L. and D. Uttamchandani, "Demonstration of a tunable RF MEMS bandpass filter using silicon foundry process," Journal of Electromagnetic Waves and Applications, Vol. 23, No. 2-3, 405-413, 2009.
doi:10.1163/156939309787604355 Google Scholar

13. Peroulis, D., S. Pacheco, and L. P. B. Katehi, "MEMS devices for high isolation switching and tunable filtering," IEEE Int. Microwave Symp. Dig., 1217-1220, 2000. Google Scholar

14. Topalli, K., O. Aydin Civi, S. Demir, S. Koc, and T. Akin, "A monolithic phased array using 3-bit DMTL RF MEMS phase shifters ," IEEE Trans. Microwave Theory and Tech., Vol. 56, No. 2, 270-277, Feb. 2008.
doi:10.1109/TMTT.2007.914377 Google Scholar

15. Simons, R. N., Coplanar Waveguide Circuits, Components and Systems , John Wiley & Sons, 2001.

16. Goel, A. K., High-Speed VLSI Interconnections: Modeling, Analysis, and Simulation, Wiley, New York, 1994.

17. Pacheco, S. P., L. P. B. Katehi, and C. T.-C. Nguyen, "Design of low actuation voltage RF MEMS switch," 2000 IEEE MTT-S Int. Microwave Symp. Dig., 165-168, Boston, MA, Jun. 2000. Google Scholar

18. Goldsmith, C., J. Ehmke, A. Malczewski, B. Pillans, S. Eshelman, Z. Yao, J. Brank, and M. Eberly, "Lifetime characterization of capacitive RF MEMS switches," IEEE Int. Microwave Symp. Dig., 227-230, 2001. Google Scholar

19. De Wolf, I., W. M. Van Spengen, R. Modlinski, A. Jourdain, A. Witvrouw, P. Fiorini, and H. A. C. Tilmans, "Proc. 28th International Symposium for Testing and Failure Analysis (ISTFA2002)," Reliability and failure analysis of RF MEMS switches, 275-281, 2002. Google Scholar

20. Melle, S., D. De Conto, D. Dubuc, K. Grenier, O. Vendier, J. L. Muraro, J.-L. Cazaux, and R. Plana, "Reliability modeling of capacitive RF MEMS," IEEE Trans. Microwave Theory and Tech., Vol. 53, No. 11, 3482-3488, Nov. 2005.
doi:10.1109/TMTT.2005.857109 Google Scholar

21. Van Spengen, W. M., R. Puers, R. Mertens, and I. De Wolf, "Experimental characterization of stiction due to charging in RF MEMS," Int. IEEE Electron. Devices Meeting Dig., 901-904, 2002.
doi:10.1109/IEDM.2002.1175982 Google Scholar

Dr. Kagan Topalli

Dr. Mehmet Unlu

Dr. Halil Ibrahim Atasoy

Prof. Simsek Demir

Prof. Ozlem Aydin Civi

Dr. Tayfun Akin