volume | PIER Journals

Abstract

In this paper, a methodology to design non-50 Ω antennas for energy harvesting is presented. Two prototypes are simulated and realized on an epoxy substrate: one operating at 433 MHz and 900 MHz, the other at 900 MHz and 2.4 GHz. These antennas are designed to match the input impedances of an integrated radio-frequency harvester for an output voltage of 1 V, value chosen considering the voltage needed to power the new generation of micro-controllers and electronic circuits for the Internet of Things. The measurement results indicate a reflection coefficient below -10 dB at the frequencies of interest, validating the methodology.

1. Dini, M., M. Filippi, A. Costanzo, A. Romani, M. Tartagni, M. Del Prete, and D. Masotti, "A fullyautonomous integrated RF energy harvesting system for wearable applications," 2013 European Microwave Conference (EuMC), 987-990, October 2013. Google Scholar

2. Pinuela, M., P. D. Mitcheson, and S. Lucyszyn, "Ambient RF energy harvesting in urban and semiurban environments," IEEE Transactions on Microwave Theory and Techniques, Vol. 61, No. 7, 2715-2726, July 2013.
doi:10.1109/TMTT.2013.2262687 Google Scholar

3. Li, B., S. Xi, N. Shahshahan, N. Goldsman, T. Salter, and G. M. Metze, "An antenna co-design dual band RF energy harvester," IEEE Transactions on Circuits and Systems I: Regular Papers, Vol. 60, No. 12, 3256-3266, December 2013.
doi:10.1109/TCSI.2013.2264712 Google Scholar

4. Niotaki, K., S. Kim, S. Jeong, A. Collado, A. Georgiadis, and M. Tentzeris, "A compact dualband rectenna using slot-loaded dual band folded dipole antenna," IEEE Antennas and Wireless Propagation Letters, Vol. 12, 1634-1637, 2013.
doi:10.1109/LAWP.2013.2294200 Google Scholar

5. Kuhn, V., C. Lahuec, F. Seguin, and C. Person, "A multi-band stacked RF energy harvester with RF-to-DC efficiency up to 84%," IEEE Transactions on Microwave Theory and Techniques, Vol. 63, No. 5, 1768-1778, May 2015.
doi:10.1109/TMTT.2015.2416233 Google Scholar

6. Parks, A. N. and J. R. Smith, "Sifting through the airwaves: Efficient and scalable multiband RF harvesting," Proc. of IEEE International Conference on RFID, 7481, April 2014. Google Scholar

7. Parks, A. N. and J. R. Smith, "Active power summation for efficient multiband RF energy harvesting," Proc. of International Microwave Symposium, 2015. Google Scholar

8. HFSS by Ansys, http://ansys.com/en-GB/Products/Electronics/ANSYS-HFSS.

9. Balanis, C. A., Antenna Theory: Analysis and Design, 3rd Ed., Wiley-Interscience, 2005.

10. Brown, G. H. and O. M. Woodward, "Experimentally determined radiation characteristics of conical and triangular antennas," RCA Review, Vol. 13, No. 4, 425-452, December 1952. Google Scholar

11. Booker, H. G., "Slot aerials and their relation to complementary wire aerials (Babinet’s principle)," Journal of the Institution of Electrical Engineers --- Part IIIA: Radiolocation, Vol. 93, No. 4, 620-626, 1946.
doi:10.1049/ji-3a-1.1946.0150 Google Scholar

12. Bergeret, E., J. Gaubert, P. Pannier, and P. Rizzo, "Power generation system for UHF passive RFID," Electronics Letters, Vol. 42, No. 25, 1452-1454, December 2006.
doi:10.1049/el:20063329 Google Scholar

13. Rizzo, P., E. Bergeret, J. Gaubert, and P. Pannier, Contactless integrated circuit with highefficiency electrical power supply circuit, patent US7580694 B2, August 2009.

14. Qing, X., C. K. Goh, and Z. N. Chen, "Impedance characterization of RFID tag antennas and application in tag co-design," IEEE Transactions on Microwave Theory and Techniques, Vol. 57, No. 5, 1268-1274, May 2009.
doi:10.1109/TMTT.2009.2017288 Google Scholar

Dr. Celine Leclerc

Dr. Matthieu Egels

Dr. Emmanuel Bergeret