volume | PIER Journals

Abstract

A satellite-borne frequency selective surface (FSS) for atmospheric sensing application is presented. This brand new type of band-pass filter has an operating frequency at 183 GHz, which is a typical frequency on H₂O absorption line. Comprising an ultra-thin gilding layer and a SiO₂ substrate layer, this complex periodic component exhibits an extremely low insertion loss (< 0.22 dB) and high isolation (> 20 dB) between closely spaced frequency channels of 45° incident wave. Periodic Method of Moment (PMM) approach is applied to determine the initial geo-metrical parameters of FSS unit cell, and the optimization approach based on the Genetic Algorithm (GA) enables us to obtain the requisite spectral response and transmission characteristics for both TE and TM polarization. The experimental results show that the proposed PMM-GA technique is effective for analyzing space-borne FSS at millimeter wave range.

1. Wu, T. K., Frequency Selective Surface and Grid Array, Wiley, New York, 1995.

2. Munk, B. A., "Frequency Selective Surfaces: Theory and Design," Wiley, New York, 2000. Google Scholar

3. Zhang, J.-C., Y.-Z. Yin, and J.-P. Ma, "Design of narrow band-pass frequency selective surfaces for millimeter wave applications," Progress In Electromagnetics Research, Vol. 96, 287-298, 2009.
doi:10.2528/PIER09081702 Google Scholar

4. Nguyen, T. K., T. A. Ho, I. Park, and H. Han, "Full-wavelength dipole antenna on a GaAs membrane covered by a frequency selective surface for a terahertz photomixer," Progress In Electromagnetics Research, Vol. 131, 441-455, 2012. Google Scholar

5. Wu, X., Z.-B. Pei, S.-B. Qu, Z. Xu, J.-Q. Zhang, H. Ma, and X.-H. Wang, "Design and experimental Verification of band-pass Frequency Selective Surface Based on metamaterial Effective Medium Theory," Journal of Infrared and Millimeter Waves, Vol. 30, No. 5, 469-474, 2011.
doi:10.3724/SP.J.1010.2011.00469 Google Scholar

6. Zhu, X., W. Shao, J.-L. Li, and Y.-L. Dong, "Design and optimization of low RCS patch antennas based on a genetic algorithm," Progress In Electromagnetics Research, Vol. 122, 327-339, 2012.
doi:10.2528/PIER11100703 Google Scholar

7. Jian, L., G. Xu, J. Song, H. Xue, D. Zhao, and J. Liang, "Optimum design for improving modulating-effect of coaxial magnetic gear using response surface methodology and genetic algorithm," Progress In Electromagnetics Research, Vol. 116, 297-312, 2011. Google Scholar

8. Monacelli, B., J. B. Pryor, B. A. Munk, D. Kotter, and G. D. Boreman, "Infrared frequency selective surface based on circuit-analog square loop design," IEEE Transactions on Antennas and Propagation, Vol. 53, No. 2, 745-752, 2005.
doi:10.1109/TAP.2004.841290 Google Scholar

9. Weile, D. S. and E. Michielssen, "Genetic algorithm optimization applied to electromagnetics: A review," IEEE Transactions on Antennas and Propagation, Vol. 45, No. 3, 343-353, 1997.
doi:10.1109/8.558650 Google Scholar

10. Monavar, F. M. and N. Komjani, "Bandwidth enhancement of microstrip patch antenna using jerusalem cross-shaped frequency selective surfaces by invasive weed optimization approach," Progress In Electromagnetics Research, Vol. 121, 103-120, 2011.
doi:10.2528/PIER11051305 Google Scholar

11. Biber, S., M. Bozzi, O. Gunther, L. Perregrini, and L. P. Schmidt, "Design and testing of frequency selective surfaces on thick silicon substrate operating at 600 GHz," IEEE Microwave Conference, Vol. 1, European, 2005. Google Scholar

12. Ohira, M., H. Deguchi, M. Tsuji, and H. Shigesawa, "Multiband single-layer frequency selective surface designed by combination of genetic algorithm and geometry-refinement technique," IEEE Transactions on Antennas and Propagation, Vol. 52, No. 11, 2925-2931, 2004.
doi:10.1109/TAP.2004.835289 Google Scholar

13. Monorchio, A., G. Manara, U. Serra, G. Marola, and E. Pagana, "Design of waveguide filters by using genetically optimized frequency selective surfaces," IEEE Microwave and Wireless Components Letters, Vol. 15, No. 6, 407-409, 2005.
doi:10.1109/LMWC.2005.850482 Google Scholar

14. Gingrich, M. A. and D. H. Werner, "Synthesis of low/zero index of refraction metamaterials from frequency selective surfaces using genetic algorithms," Electronics Letters, Vol. 41, No. 23, 1266-1267, 2005.
doi:10.1049/el:20053004 Google Scholar

15. Djabery, R., S. Nikmehr, and S. Hosseinzadeh, "Grating effects on sidelobe suppression in MIM plasmonic filters," Progress In Electromagnetics Research, Vol. 135, 271-280, 2013. Google Scholar

16. Brennan, P. V., A. Narayanan, and R. Benjamin, "Grating lobe control in randomised, sparsely populated MIMO radar arrays," IET Radar, Sonar & Navigation, Vol. 6, No. 7, 587-594, 2012.
doi:10.1049/iet-rsn.2010.0347 Google Scholar

17. Manara, G., A. Monorchio, and R. Mittra, "Frequency selective surface design based on genetic algorithm," Electronics Letters, Vol. 35, No. 17, 1400-1401, 1999.
doi:10.1049/el:19990991 Google Scholar

18. Min, K. I., S. H. Ha, S. W. Lee, and Y. H. Moon, "Transmission loss allocation algorithm using path-integral based on transaction strategy," IEEE Transactions on Power Systems, Vol. 25, No. 1, 195-205, 2010.
doi:10.1109/TPWRS.2009.2030349 Google Scholar

19. Raynolds, J. E., B. A. Munk, J. B. Pryor, and R. J. Marhefka, "Ohmic loss in frequency-selective surfaces," Journal of Applied Physics, Vol. 93, No. 9, 5346-5358, 2003.
doi:10.1063/1.1565189 Google Scholar

20. Su, J., X.-W. Xu, M. He, and K. Zhang, "Integral-equation analysis of frequency selective surfaces using Ewald transformation and lattice symmetry," Progress In Electromagnetics Research, Vol. 121, 249-269, 2011.
doi:10.2528/PIER11081902 Google Scholar

Dr. Bu Gang Xia

Dr. Jin Meng

Dr. De Hai Zhang

Dr. Jin Sheng Zhang